|
Properties |
Methods |
Physical properties of an edge for problems of AC magnetics.
The LabelEdgeHE object represents physical data applicable to the edge label for time-harmonic magnetics problems.
When you need to set or modify some physical parameters for the edge label, you have to get the LabelEdgeHE object using the Content property of the Label object, modify the LabelEdgeHE object using its properties, and then put it back in the Label object assigning your LabelEdgeHE to the Content property of your Label object.
The LabelEdgeHE object inherits methods and properties from its base class LabelEdge. Here the LabelEdge's properties take the following meaning:
|
Set and get the known amplitude (peak) value of vector magnetic potential A0 at the edge. | |
|
Neumann property
|
Sets and gets the amplitude (peak) value of the tangential component of the magnetic field intensity vector Hn, that is equal to a linear density of the surface current. |
|
Floating property
|
If True defines the edge as a surface of a superconducting material that is not penetrated by magnetic field. The conductor is assumed to have a constant but unknown potential value A=const (rA = const in axisymmetric case). |
Vector magnetic potential and a component of the field intensity vector are complex values. They are completely defined by the amplitude and phase values. So, the LabelEdgeHE object provides two additional properties that operate with phase angle. They are:
|
DirichletPhase property
|
Set and get the phase value of vector magnetic potential A0 at the edge in degrees. |
|
Neumann property
|
Sets and gets the phase value of tangential component of the magnetic field intensity vector Hn in degrees. |